 |
| Butt Fusion Machine |
Gapura Fajar Langgeng menjual dan juga menyewakan mesin las HDPE untuk segala ukuran pipa. Kami siap menyambung pipa HDPE anda dari mulai OD 63mm hingga 1600mm. Ready stock dalam jumlah banyak untuk segala ukuran mesin berikut tenaga welder nya.
Beberapa alasan menggunakan mesin las HDPE / butt fusion adalah sebagai berikut:
- Paling ekonomis dibanding dengan socket fusion maupun electro fusion
- Kuat dan tahan lama
- Pemeliharaan mesin tergolong mudah.
- Tersedia dalam aneka range ukuran
SHD160/63 Hydraulic butt fusion
welding machine
.JPG)
Hydraulically operated butt welding machine, suitable for
PE, PP and PVDF pipes and fittings. High
quality design and construction provides an excellent machine for welding both
on the worksite and in the factory. The use of high quality
Aluminum castings allows for lower weight without compromising
strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy
main clamps of 160mm diameter
* Welding range 63mm to 160mm OD
* Layer clamps: 160x140, 140x125, 125x110,
110x90, 90x75, 75x63 (mm)
*
Optional 2 piece liners: 160x140, 160x125, 160x110, 160x90, 160x75, 160x63 (mm)
* German hydraulic seals
* Removable PTFE coated heating plate with
high accurate temperature control system
*
Removable cast Aluminum electrically operated facing tool with current overload
protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in
soaking and cooling phases
* Working voltage: single phase
~220V ±10%,
50Hz (total power: 2.75kw, including trimmer: 1.0kw, heater: 1.0kw, hydraulic
unit motor:
0.75kw)
~240V ±10%, 50Hz
(total power: 2.94kw, including trimmer: 1.0kw, heater: 1.19kw, hydraulic unit motor:
0.75kw)
Optional 60Hz also available
*
Environment temperature: －10°～45°
* Whole machine consists of basic frame, heater, trimmer,
hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end
fittings
* Optional wheeled trolley available
SHD250/90 Hydraulic butt fusion
welding machine
Hydraulically operated butt welding machine, suitable for
PE, PP and PA:1F pipes and fittings. High quality design and construction provides
an excellent machine for welding both on the worksite
and in the factory. The use of high quality Aluminum castings allows for lower
weight without corn prom ising
strength and performance. Can be integrated with optional data logger
Technical
speciffcations:
* Main
frame includes four light weight alloy main clamps of 250mm diameter
* Welding range 90mm to 250mm OID
*Layer
clamps: 250x225, 225x200,200x180,180x160,160x140,140x125,125x110,110x90 (mm)
* Optional
2 piece liners: 250x225,250x200,250w180,250x160,160x140,160x125,160x110,160x90 (mm)
*German
hydraulic seals
* Removable
PTFE coated heating plate with high accurate temperature control system
*Removable
cast Aluminum electrically operated facing tool with current overload
protection
* Electro-hydraulic
pump with controls, and quick release hose
* Separate
two-channel timer records time in soaking and cooling phases
*Working
voltage: single phase
-220V =10%, 50Hz (total power: 3_95kw, including
trimmer:1_11(w, heater: 2.1kw, hydraulic unit motor: 0.75kvv)
-240V
=10%, 50Hz (total power: 4.35k-vv, including trimmer: likw, heater:
2.5kw, hydraulic unit motor: 0.75kw)
Optional
60Hz also available
* Environment
temperature: 10= ...45C
*Whole machine consists of basic frame, heater, trimmer.
hydraulic unit and support (for heater & trim 9-1er)
* Optional
stub end device for welding end fittings
* Optional
wheeled trolley available
SHD315/90 Hydraulic butt fusion
welding machine
Hydraulically operated butt welding machine, suitable for
PE, PP and PVDF pipes and fittings. High
quality design and construction provides an excellent machine for welding both
on the worksite and in the factory. The use of high quality
Aluminum castings allows for lower weight without compromising
strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy
main clamps of 315mm diameter
* Welding range 90mm to 315mm OD
* Layer clamps: 31 5x280,280x250,250x225,225x200,200x1
80,1 80x1 60,1 60x1 40,1 40x1 25, 125x110,110x90
(mm)
* Optional 2 piece liners: 315x280,315x250,315x225,315x200,315x180,315x160,160x140,
160x125,160x110,160x90
(mm)
* German hydraulic seals
* Removable PTFE coated heating plate with
high accurate temperature control system
*
Removable cast Aluminum electrically operated facing tool with current overload
protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in
soaking and cooling phases
* Working voltage: single phase
~220V
±10%, 50Hz (total power: 4.95kw,
including trimmer: 1.1kw, heater: 3.1kw, hydraulic unit motor: 0.75kw)
~240V
±10%, 50Hz (total power: 5.55kw,
including trimmer: 1.1kw, heater: 3.7kw, hydraulic unit motor: 0.75kw)
Optional 60Hz also available
*
Environment temperature: －10°～45°
* Whole machine consists of basic frame, heater,
trimmer, hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end
fittings
* Optional wheeled trolley available
SHD450/200 Hydraulic butt fusion
welding machine
Hydraulically operated butt welding
machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction
provides an excellent machine for welding both on the worksite and in the factory. The use
of high quality Aluminum castings allows for lower weight without compromising strength and
performance. Can be integrated with optional data logger
Technical specifications:
*
Main frame includes four light weight alloy main clamps of 450mm diameter
*
Welding range 200mm to 450mm OD
*
Layer clamps: 450x400,400x355,355x31 5,31 5x280,280x250,250x225,225x200 (mm)
* Optional 2 piece liners:
450x400,450x355,450x315,450x280,315x250,315x225,315x200 (mm) * German hydraulic
seals
*
Removable PTFE coated heating plate with high accurate temperature control
system
* Removable cast Aluminum
electrically operated facing tool with current overload protection *
Electro-hydraulic pump with controls, and quick release hose
*
Separate two-channel timer records time in soaking and cooling phases
*
Working voltage: three phases
~380V ±10%, 50Hz (total power: 8.2kw,
including trimmer: 1.5kw, heater: 5.2kw, hydraulic unit motor: 1.5kw)
~415V ±10%, 50Hz (total power: 9.2kw,
including trimmer: 1.5kw, heater: 6.2kw, hydraulic unit motor: 1.5kw)
Optional
60Hz also available
* Environment temperature: －10°～45°
* Whole machine consists of basic
frame, heater, trimmer, hydraulic unit and support (for heater & trimmer)
*
Optional stub end device for welding end fittings
*
Optional wheeled trolley available
SHD630/315 Hydraulic butt fusion
welding machine
Hydraulically operated butt welding machine, suitable for
PE, PP and PVDF pipes and fittings. High
quality design and construction provides an excellent machine for welding both
on the worksite and in the factory. The use of high quality
Aluminum castings allows for lower weight without compromising
strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy
main clamps of 630mm diameter
* Welding range 315mm to 630mm OD
* Layer clamps: 630x560, 560x500, 500x450,
450x400, 400x355, 355x315 (mm)
*
Optional 2 piece liners: 630x560, 630x500, 630x450, 630x400, 450x355, 450x315
(mm) * German hydraulic seals
* Removable PTFE coated heating plate with
high accurate temperature control system
*
Removable cast Aluminum electrically operated facing tool with current overload
protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in
soaking and cooling phases
* Working voltage: three phases
~380V
±10%, 50Hz (total power: 12.2kw,
including trimmer: 1.5kw, heater: 9.2kw, hydraulic unit motor: 1.5kw)
~415V ±10%, 50Hz
(total power: 14kw, including trimmer: 1.5kw, heater: 11kw, hydraulic unit motor:
1.5kw)
Optional 60Hz also available
*
Environment temperature: －10°～45°
* Whole machine consists of basic frame, heater,
trimmer, hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end
fittings
* Optional wheeled trolley available
SHD800/450 Hydraulic butt fusion
welding machine
Hydraulically operated butt welding
machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction
provides an excellent machine for welding both on the worksite and in the factory. The use
of high quality Aluminum castings allows for lower weight without compromising strength and
performance. Can be integrated with optional data logger
Technical specifications:
*
Main frame includes four light weight alloy main clamps of 800mm diameter
* Welding
range 450mm to 800mm OD
*
Layer clamps: 800x710, 710x630, 630x560, 560x500, 500x450 (mm)
*
Optional 2 piece liners: 800x710, 800x630, 630x560, 630x500, 630x450 (mm)
*
Low starting pressure and high reliable German hydraulic seals
*
Removable PTFE coated heating plate with high accurate temperature control
system
* Removable cast Aluminum
electrically operated facing tool with current overload protection * Electro-hydraulic pump with
controls, and quick release hose
*
Separate two-channel timer records time in soaking and cooling phases
* Electric overhead crane is included
with standard machine
*
Working voltage: three phases
~380V ±10%, 50Hz (total power:
17.5kw, including trimmer: 1.5kw, heater: 12.5kw, hydraulic unit motor: 3kw, electric hoist: 0.5kw)
~415V ±10%, 50Hz (total power: 20kw,
including trimmer: 1.5kw, heater: 15kw, hydraulic unit motor: 3kw, electric hoist: 0.5kw)
Optional
60Hz also available
* Environment temperature: －10°～45°
* Whole machine consists of basic
frame, heater, trimmer, hydraulic unit, support (for heater & trimmer) and electric overhead crane
*
Optional stub end device for welding end fittings
*
Optional wheeled trolley available
SHD1200/630 Hydraulic butt fusion
welding machine
Hydraulically operated butt welding machine, suitable
for PE, PP and PVDF pipes and fittings. High quality design and
construction provides an excellent machine for welding both on the worksite and in the factory. The use of high
quality Aluminum castings allows for lower weight without compromising
strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy
main clamps of 1200mm diameter
* Welding range 630mm to 1200mm OD
* Layer clamps: 1200x1 000, 1000x900,
900x800, 800x710, 710x630 (mm)
* Optional 2 piece liners: 1200x1000, 1200x900, 1200x800,
800x710, 800x630 (mm) * Low starting pressure and high reliable
German hydraulic seals
* Removable PTFE coated heating plate with
high accurate temperature control system
*
Removable cast Aluminum electrically operated facing tool with current overload
protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in
soaking and cooling phases
*
Electric overhead crane is included with standard machine
* Working voltage: three phases
~380V ±10%, 50Hz
(total power: 29kw, including trimmer: 3kw, heater: 22kw, hydraulic unit motor:
3kw,
electric hoist: 1kw)
~415V
±10%, 50Hz (total power: 33.2kw,
including trimmer: 3kw, heater: 26.2kw, hydraulic unit motor: 3kw, electric
hoist: 1kw)
Optional 60Hz also available
*
Environment temperature: －10°～45°
* Whole machine consists of basic frame, heater, trimmer,
hydraulic unit, support (for heater & trimmer) and electric
overhead crane
* Optional stub end device for welding end
fittings
* Optional wheeled trolley available
Hubungi kami untuk pembelian dan sewa butt fusion machine:
Warga Tehnik Mekanika (WTM),
Jalan dr. Ratna no.1001-5,
Kavling BNI 46,
Jatibening (depan toko besi INDO BAJA), Bekasi 17421
rudy_prmd@yahoo.com
0816 877 518 (WA), 0813 8189 7820
Jalan dr. Ratna no.1001-5,
Kavling BNI 46,
Jatibening (depan toko besi INDO BAJA), Bekasi 17421
rudy_prmd@yahoo.com
0816 877 518 (WA), 0813 8189 7820
#jualpipahdpe
#kontraktorpipahdpe
#jualcompressionfitting
#jualbuttfusionfitting
#jualmesinbuttfusion
#sewamesinlashdpe
#jualgeomembranehdpe
#jualsegmentedfittinghdpe
#kontraktorpipahdpe
#jualcompressionfitting
#jualbuttfusionfitting
#jualmesinbuttfusion
#sewamesinlashdpe
#jualgeomembranehdpe
#jualsegmentedfittinghdpe
Google+: https://plus.google.com/111386083406997311576/posts?hl=id
Facebook: http://www.facebook.com/pipahdpe
Blog: http://hargapipahdpe.blogspot.com
Website: http://gflanggeng.wordpress.com
Facebook: http://www.facebook.com/pipahdpe
Blog: http://hargapipahdpe.blogspot.com
Website: http://gflanggeng.wordpress.com
.JPG){kind=link}
1 Komentar untuk "Warga Tehnik Mekanika"
Jarwostok
0812 801 36 339
021 958 64 718
jarwostok@gmail.com
http://distributorhdpe.webs.com/jarwostok.htm
http://mesinpenyambungpipahdpe.weebly.com/
http://miningpipe.blogspot.com/2012/03/jarwostok-is-hdpe-piping-system-company.html